GDL7mInnovative, Radio-Controlled Mortise Lock
The GDL7m is the first mortise lock that integrates seamlessly into a GANTNER online access control system without any cabling and thus requiring no conversion work. In addition, the innovative high-tech lock offers similar functionality to a wired push-handle lock, such as the possibility of remote opening or independent locking when closing the door. And best of all, batteries are completely eliminated thanks to the optional inductive energy transfer, which is not only environmentally friendly, but also enormously cost-efficient since no maintenance is required.
The GDL7m is conveniently controlled by means of the GANTNER access control reader, which reads the existing employee and visitor ID cards. Depending on the security requirement, the reader can be supplemented with a PIN-code keypad or a fingerprint reader. The signal transmission to the GDL7m takes place via radio frequency. The pairing between reader and GDL7m is simultaneously simple and secure. An installation-specific ID card and a mechanical key are required for the establishment of the AES encrypted communication. After that, the communication between reader and lock is secure and reliable.
- Full design freedom in the choice of handles and fittings
- No wiring of the door required
- Maintenance-free, battery-free operation possible through inductive energy transfer
- 20 mm whisper-quiet latchbolt with automatic self-locking and tamper-proof actuation
- Combination with a variety of RFID readers possible
- Full-leaf, tubular-frame, and glass door variants available
Further Products Access control and time recording
GT7 Generation of devices beyond anything experienced so far.
Software GAT Matrix
GAT Matrix is a software solution for the administration of access credentials within the GAT ...
GAT Mobile Access Management
Mobile solutions for secure and convenient access and alarm management
Door controller GAT DC 7200
Door controller for access control readers.
GAT ACE 7000
Interface between GANTNER terminals and the management software
GAT ACE 3000
Software GAT ACE 3000 is an interface between GANTNER terminals and the management software.
Access control reader GAT SR 7380
Access control reader with unique design.
Access control reader with keypad GAT SR 7310 / 7315 / 7317
Access control reader equipped with a PIN code keypad.
Access control reader GAT SR 73xx
Simple, multifunctional access control reader
Access control reader with sleek design GAT SR 7340 / 7345
Access control reader designed for a flush-mounted installation.